Technical data KEN 10, KEN 10-F, KE 10
|
Nominal data |
Terminal |
KEN 10 |
KEN 10-F |
KE 10 |
|---|---|---|---|---|
|
Input voltage (power supply) |
X07 |
3 x 400 VAC, 47...63 Hz |
- |
|
|
Input current (power supply) |
X07 |
15 A |
- |
|
|
Input voltage (power supply) (charging circuit) |
X01 X20 |
- - |
- - |
3 x 400 VAC, |
|
Input current (power supply) |
X01 |
- |
- |
15 A |
|
Input voltage (logic supply) |
X08 X09 |
24 VDC |
||
|
Input power (logic supply) |
X08 X09 |
20 W |
22 W |
7,5 W |
|
Efficiency |
approx. 99 % |
|||
|
Power factor λ |
approx. 0,9 |
|||
|
|
||||
|
Output power |
X02 |
10 kW |
||
|
Max. output power |
X02 |
20 kW for 60 s |
||
|
Output voltage (information: Siehe 'DC bus voltage'.) |
X02 |
540 VDC |
||
|
Output current |
X02 |
19 A (at 540 VDC) |
||
|
Regenerative feedback |
no |
Line-synchr. block feedback |
||
|
Max. generative power (regenerative feedback) |
- |
20 kW for 60 s |
||
|
Braking transistor |
Integrated |
|||
|
Brake threshold |
|
800 VDC |
||
|
Shutdown threshold of the DC bus overvoltage |
|
850 VDC |
||
|
Shutdown threshold of the DC bus undervoltage |
|
SEEP value typically 385 VDC parametrization with ID32837 'DC bus voltage monitoring' |
||
|
External brake resistor |
X03 |
Rev. 1.00: min. 33 Ohm |
min. 20 Ohm |
|
|
Protective/ monitoring functions |
Line overcurrent (I2t), Short circuit external braking resistor, Excess temperature heat sink and external brake resistor |
|||
|
Fieldbus connection |
X236 X237 |
ACC bus |
||
|
Interference filter (EN 61800-3, table 11) |
Integrated |
|||
|
Charging circuit, main contactor |
Integrated |
External |
||
|
Cooling |
External air or liquid cold plate |
Integrated |
External air or liquid cold plate |
|
|
Max. cold plate or ambient temperature |
40 °C |
|||
|
Module width |
55 mm |
85 mm |
||
|
Weight |
3 kg |
4.2 kg |
||
